Installing an air conditioner may seem easy, but even small mistakes could lead to big problems down the road. Incorrect installation can cause discomfort, higher energy costs, and expensive repairs. To ensure your air conditioner works efficiently for years, it’s best to hire professionals, whether you choose an expert electrician in Singapore.
Aircon Installation: 7 Common Mistakes to Avoid
Let us discuss here about seven typical mistakes people make when installing air conditioning, and how good planning and understanding can help you get the most out of your installation.
1. Improper Positioning of Aircon
Getting the air conditioner installed in the correct spot is crucial since it affects how efficiently it uses electricity. To keep your air conditioner from overworking itself by cooling your house, put it somewhere shaded. Proper drainage is ensured by putting window air conditioners with a modest tilt towards the back. Keep in mind that while installing air conditioning in a shaded area, it should not be obstructed by nearby trees or plants. In order to keep your energy bill to a minimum, it is crucial that your air conditioner be properly ventilated.
2 – Mismeasured System Dimensions
Improper humidity management, excessive operating expenses, and unpleasant temperature swings are all possible outcomes of installing an air conditioning system that is too large. But inadequate cooling, expensive energy bills, and premature equipment failure result from an undersized system. A reliable air conditioning contractor should be contacted and a thorough load circulation should be performed before the installation of the air conditioner. Upon visiting your property, the contractor’s technicians will measure the windows, ceiling, floors, walls, and more. Before deciding on the necessary cooling capacity for your property, they will examine the insulation levels and take other aspects into account.
3 – Misaligned Thermostat Installation
Keep the thermostat at least a safe distance from any heat sources, such as lamps. You might expect a rise in your energy expenses due to the increased use of your air conditioner if the thermostat is left exposed to heat all the time. Improper cooling, unhealthy humidity levels, and increased maintenance expenses are the outcomes of air conditioners that are overworked. Furthermore, the aircon’s lifespan will be shortened if it is used excessively.
4 – Inadequate Insulation
The room’s insulation should be properly considered. When installing a window air conditioner, make sure to use insulating foam to fill the spaces between the top and bottom window glass. When it comes to window air conditioners, there are specialized insulation panels that offer superior insulation. Installing ducts of the appropriate size is crucial for split-AC systems. A miscalculation in the duct size, which is based on load circulation, can lead to inefficient cooling and premature equipment failure. Another source of trouble is ductwork that isn’t properly sealed, which allows cooled air to escape and puts more strain on the air conditioner.
5 – Skipping the Leak Check
When installing air conditioning, make sure to check the coolant level, also known as Freon. A ten percent loss of coolant or Freon can lead to a twenty percent increase in power costs, and any leakage can create numerous health risks. Inspecting for leaks is important, but installers often overlook them when installing new air conditioning systems. However, damage to the system during installation is a common cause of leaks.
6 – The Indoor Air Quality Crisis
One big issue is interior air pollution, which can make your air conditioner work less efficiently. Household allergens such as mold, pollen, resins, mildew, carpets, and more can contribute to air pollution within your house. Indoor air pollution can worsen in environments with poor ventilation and high relative humidity. An air conditioner’s functionality and performance might be impacted by certain contaminants. Finding a reliable contractor, however, will make this problem go away because they will tell you what to do to make your home less polluted. In addition, a contractor can provide you with advice regarding additional equipment that can assist you in further removing the air contaminants.
7 – Making a Poor Contractor Selection
Installing aircon is something that many people find intimidating. For this reason, they opt to get experts to do the task for them. Nevertheless, they err when they choose a contractor by going with the one who offers the lowest prices. A contractor without sufficient training will not only install your air conditioner incorrectly, but they could also break your windows or harm the equipment. Hence, it’s crucial to conduct thorough research before selecting the installation, rather than impulsively going with the most affordable option.
Conclusion
One of the steps in installing an aircon unit is mounting the hardware. There are numerous more steps as well. This procedure requires a lot of planning, technical skill, and accuracy. To get the most done and make things as easy as possible, it’s important to follow all of the instructions exactly. If you can avoid making these typical blunders and instead rely on the experience of specialists, you can enjoy long-lasting cooling performance, lower energy costs, and comfort. If you’re thinking about installing new software or upgrading your system, it’s very important that you talk to specialists that have a great reputation in the tech industry. If you follow the directions exactly, the job will be done right the first time.
