Reusable water tanks cleaning and bottles are very convenient containers. They are light, practical, and inexpensive. But they have one important drawback – they are very difficult and inconvenient to wash. It is simply impossible to clean a container with a thin neck without special tools and means. Over time, greens, plaque, or mold will appear on the walls and bottom inside. And if the bottle or tank is not washed, then storing water in them and using it will be harmful and even dangerous to health.
Today we will tell you how to wash a water bottle or large tank, what you can do at home, and how to ensure that drinking water does not lose its qualities during storage. Let’s get started!
Common ways to clean water tanks and bottles:
We will consider several options for cleaning the bottle from greenery and other contaminants. Choose the one that suits you.
Soda treatment
The first thing you can use to clean a bottle or tank and remove mold, greens, and scale is baking soda. For a 20-liter container, 200 g of baking soda and a little water are enough to form a slurry. It should be evenly applied to the inner surfaces of the container, left for a few hours, and then rinsed and rinsed with clean water to remove any remaining dirt.
However, it is obvious that cleaning a plastic tank with a narrow neck in this way will be problematic – you simply will not be able to apply the composition evenly. And therefore, washing off greens and other contaminants will be much more difficult. What to do in this case? More on that later!
Cleaning with salt and dishwashing detergent
If you are looking for how to clean a water bottle with a narrow neck, this could be a great option. Pour 4~5 tablespoons of salt into the bottle or cooler, then another 3-4 tablespoons of regular dishwashing detergent and a little water. Now you need to shake the container in a circular motion to remove the plaque and greens.
This composition works as an abrasive, removing even fairly stubborn plaque.
If there is still a deposit on the bottom of the tank and it cannot be cleaned, you can leave this composition inside for a few hours, so that it has the maximum effect on pollution and removes greenery. The plastic material will not suffer from this.
Using pharmacy products
In search of how and what to clean a water bottle, cooler, tank or ordinary eggplant from dirt, you can use pharmacy products. Take 100 ml of hydrogen peroxide and dilute it in 2 liters of water (for a container volume of 20 liters). Pour it inside, close the lid and leave for several hours. The composition will dissolve the greens, dirt and sediment during the reaction, after which it will be enough to wash the container with clean water.
Cleaning with regular cola and citric acid
Another option for how and with what to wash a plastic bottle, cooler, or tank is cola and citric acid. Buy one and a half to two liters of regular cola, pour it into the bottle, and add 15–20 g of citric acid.
Do not close the lid! The cola and acid react and release a lot of gas, which can simply tear the lid off.
After 10 minutes, drain the liquid and rinse the bottle to remove any remaining mixture and dirt. This is a really good option for cleaning your water bottle as quickly and inexpensively as possible.
How to cleaning water tank containers from contamination and how to keep them longer
We can give you a few simple tips that will help you keep your bottle or tank clean for longer and worry less about how and what to clean them with:
- Perform preventive washing regularly. The more often you wash your containers, the less plaque and dirt will accumulate on them.
- Store bottles in a dark and cool place away from sunlight, which promote the development of algae and microorganisms.
- Use clean and filtered water to fill containers, avoiding water from wells, rivers, or other sources that may contain impurities or bacteria.
- Depending on how you use the water, add disinfectants to it: chlorine, hydrogen peroxide, silver. They kill microbes, thereby preventing the formation of mold and green.
- If there is some water left at the bottom that you will no longer use, it is best to drain it so that it does not stagnate.
Now you know how and with what you can clean your water tank or bottle, how to prevent mold and mildew, and how to care for your containers to keep them clean for as long as possible. Thank you for your attention!
Recommended article: Oracle Database 19c Certification: Key Concepts and Study Tips for 1Z0-1195-25
