When you run a brick factory, your equipment takes a beating. The most hardworking part is often the board that carries the wet blocks. If you want to grow your business, choosing the right GMT block machine pallet is vital. You might also consider the traditional PVC pallet for your production line. Both options have unique traits that affect your daily output and long-term costs. Many factory owners wonder which one lasts longer under high pressure. This review helps you decide which material fits your specific machine and budget.

Who Is Linyi Rhinos Pallet Co.Ltd?

Linyi Rhinos Pallet Co.Ltd is a professional manufacturer based in China. They specialize in high-quality pallets for all types of concrete block machines. You can find their full range of products at https://gmt-pallet.com/. They focus on making durable boards that help brick makers reduce waste and increase efficiency.

What is a GMT Block Machine Pallet?

GMT stands for Glass Mat Reinforced Thermoplastics. It is a high-tech composite material. Manufacturers make it by melting plastic and reinforcing it with glass fibers. The glass fibers run in different directions. This creates a very strong internal structure.

And because it uses glass mats, it does not snap easily. It handles the heavy vibration of a block machine without cracking. It is much stronger than a standard plastic board. Most modern factories now prefer this material because it is tough.

Understanding the PVC Pallet

PVC boards have been around for a long time. They are made of polyvinyl chloride plastic. People like them because they are very smooth. This smoothness helps the bottom of the concrete blocks look neat.

But PVC is quite heavy. It also reacts to the weather. If your factory gets very hot or very cold, PVC might change shape. It can become brittle in the winter. If it gets too cold, the boards might crack when the machine hits them.

Comparing Durability and Life Span

A GMT block machine pallet usually lasts between 6 and 10 years. This depends on how well you treat them. The glass fiber inside keeps the board flat. It does not warp even after thousands of uses. This stability is its best feature.

A PVC pallet typically lasts about 3 to 5 years. Over time, the plastic gets tired. It might start to sag in the middle. If the pallet sags, your bricks will not be flat. This causes problems when you try to sell your blocks to builders.

Weight and Ease of Use

Weight matters a lot in a brick factory. Linyi Rhinos Pallet Co.Ltd makes GMT boards that are lighter than PVC. A lighter pallet means your machine uses less power to move it. It also means your workers do not get as tired when handling them.

PVC is much denser. A PVC board can weigh 20% to 30% more than a GMT board of the same size. This extra weight puts stress on your machine’s motors. It can lead to higher repair bills for your block machine over time.

Temperature Resistance

Temperature is a big factor in pallet choice. GMT boards can handle extreme heat and cold. They stay stable from -40 degrees to 90 degrees Celsius. This makes them great for steam curing rooms.

PVC does not like extreme heat. If the curing room is too hot, the PVC can soften. When it softens, it loses its shape. This is a common complaint from factory owners in hot climates.

Impact Strength and Breakage

In a busy factory, pallets fall or get hit. If a PVC pallet falls on its corner, it often chips or cracks. Once it cracks, you cannot use it anymore. The damage usually spreads quickly across the plastic.

The GMT block machine pallet behaves differently. Because of the glass mats, it absorbs the shock. If you hit it with a hammer, it might dent, but it won’t shatter. This high impact strength saves you money on replacements.

The Cost Factor: Short Term vs Long Term

PVC boards are often cheaper to buy at first. If you have a very small budget, you might look at them first. They do the job well for a few years.

But you should think about the long term. Linyi Rhinos Pallet Co.Ltd suggests looking at the cost per year. Since GMT lasts twice as long, it is actually cheaper over time. You spend less on shipping and ordering new stock every few years.

Pros of GMT Pallets

  1. They have a very long life span of up to 10 years.

  2. The material is much lighter than PVC or steel.

  3. They do not rust or rot like wood or metal.

  4. They stay flat even under heavy pressure and heat.

  5. You can recycle them after they finally wear out.

  6. They work perfectly with high-frequency vibration machines.

Cons of GMT Pallets

  1. The initial price is higher than PVC or wood.

  2. The surface is slightly textured, not perfectly glossy like PVC.

Pros of PVC Pallets

  1. They are very affordable for new startups.

  2. The smooth surface makes very pretty block bottoms.

  3. They are waterproof and do not soak up moisture.

  4. You can find them in many different thicknesses easily.

Cons of PVC Pallets

  1. They are heavy and hard to move by hand.

  2. They become brittle and break in cold weather.

  3. They can warp if the curing room is too hot.

  4. They have a shorter life span compared to composites.

How to Maintain Your Pallets

No matter which one you choose, you must take care of them. Always clean the surface after each cycle. Do not let old concrete build up on the edges. This causes the pallets to stack unevenly.

And you should rotate your stock. Do not use the same ten pallets every single day while others sit in the back. Evenly using your pallets helps them wear down at the same rate. This keeps your block quality consistent.

Why Quality Matters for Your Machine

Your block machine is an expensive investment. Using bad pallets can hurt the machine. If a pallet is not flat, the vibration will be uneven. This uneven vibration wears out the bearings in your machine.

Buying from a trusted source like Linyi Rhinos Pallet Co.Ltd ensures your pallets are the right size. They use precise cutting tools to make sure every board is square. Square boards move through the conveyor system without jamming.

Real-World Feedback

Many factory owners in Africa and Southeast Asia are switching to GMT. They find that the boards handle the sun and humidity better. One owner reported that his PVC boards lasted only two years in the tropical heat. He switched to GMT and has not replaced a board in four years.

But some specialty brick makers still love PVC. If you make high-end paving stones, the smooth finish of PVC is a big plus. It gives the bricks a premium look that customers like.

Final Verdict: Which One Should You Buy?

If you want the best value for your money, go with the GMT block machine pallet. It is the modern choice for serious professionals. It saves you money on electricity because it is light. It also reduces your stress because it does not break easily.

But if you are just starting and have a very tight budget, a PVC pallet is a fair choice. Just be prepared to replace them sooner. Also, make sure your climate is not too cold or too hot for the plastic.

Summary Checklist for Buyers

  1. Check your machine’s weight limit for pallets.

  2. Measure your curing room temperature.

  3. Decide if you prefer a 10-year life span or a lower entry price.

  4. Look for a supplier that offers a warranty on their boards.

  5. Ask for samples to test the hardness and weight.

For more information on these products, visit Linyi Rhinos Pallet Co.Ltd at https://gmt-pallet.com/. They can help you calculate how many boards you need for your daily production goals. Selecting the right board is the first step toward a more profitable brick factory.

Always remember to check your page number when reviewing your inventory records. This helps you track which batch of pallets is performing the best on your production line. Keeping good records is the key to a successful business.

1.jpg